Short answer: phantom power is a 48-volt supply that your mixer sends down an XLR cable to power condenser microphones. Dynamic mics and USB mics do not need it, and it never powers speakers.
What is 48V phantom power?
Phantom power is a small DC voltage, normally 48 volts, that travels from your mixer to your microphone through the same XLR cable that carries the audio. It is called "phantom" because the microphone needs no battery and no extra power lead.
Condenser microphones have an active circuit inside that needs electricity to work. Without it, a condenser mic will sound silent or very faint, which is the most common beginner problem.
- Where it comes from: a mixer or audio interface with a +48V switch.
- How it travels: through a balanced XLR cable, so you need an XLR connection.
- What it powers: condenser microphones and other low-power XLR devices.
Which microphones need phantom power?
| Microphone | 48V needed? |
|---|---|
| XLR condenser (studio, podcast, vocal) | Yes, normally |
| XLR dynamic (stage, karaoke) | No |
| USB microphone | No, powered by USB |
| Wireless handheld mics (dynamic) | No, they run on their own battery |
Check your microphone's manual if you are unsure. A good example is the Hridz BM-800 Gold condenser microphone kit, which is listed as performing best with a 48V phantom power supply, audio interface or mixer. By contrast, the Hridz U8 wireless mics are dynamic and do not need phantom power, and the Hridz N2 wireless XLR converter is designed for dynamic microphones only, so do not use it with a condenser mic.
How to switch phantom power on safely
- Connect the microphone first with an XLR cable.
- Turn the channel gain and the speaker volume down. Mute the channel if your mixer has a mute switch.
- Switch +48V on and wait a few seconds for the microphone to settle.
- Raise the gain slowly until the level meter looks healthy.
- Switch +48V off before you unplug the microphone or finish for the day.
Will 48V damage my dynamic microphone?
Most dynamic microphones with a balanced XLR connection are not affected, but always check the manual. Some ribbon and vintage microphones can be damaged by phantom power. If you are not sure, leave +48V off.
My condenser mic is silent. What should I check?
Confirm that +48V is switched on for that channel, that the cable is a working XLR cable plugged into an XLR input, and that the gain is raised. Our XLR cables and audio adapters guide explains which cable you need.
Hridz mixers with 48V phantom power
If you plan to use a condenser microphone, choose a mixer with a +48V switch. These Hridz mixers include it:
- Hridz CT-80S (8 channels): 48V phantom power, Bluetooth, USB sound card and reverb and delay effects, with XLR and 1/4" TRS inputs.
- Hridz CT-120S (12 channels): 48V phantom power, Bluetooth, 3-band EQ per channel and a USB interface.
- Hridz CT-160S (16 channels): 48V phantom power, USB sound card, Bluetooth and balanced XLR main outputs.
- Hridz 4-channel karaoke machine: independent +48V on each mono channel, with two wireless mics included.
Featured product
Hridz CT-80S 8-Channel Bluetooth Audio Mixer
- 48V phantom power for condenser microphones
- Bluetooth streaming for backing tracks and music
- Built-in USB sound card for recording and streaming to a PC or Mac
- Adjustable reverb and delay with a dedicated knob for each
$239.95 AUD $299.00 Save $59.05
Buy NowYou can read the full details on the Hridz CT-80S product page. Remember that a mixer is not an amplifier, so you will also need powered speakers or an external amplifier. Phantom power is for microphones only and cannot run speakers.
Which one should I buy?
- You own a condenser microphone: choose a mixer with +48V and use an XLR cable.
- You only use dynamic or wireless mics: you do not need phantom power, so you can choose a mixer on channel count and features alone.
- You use a USB microphone: plug it straight into your computer. No phantom power is needed.
- You are not sure how many inputs you need: read our audio mixer buying guide before you choose.
Frequently asked questions
Can I leave phantom power on all the time?
It is fine to leave it on while you are using a condenser microphone. Turn it off, with the gain down, before you plug or unplug microphones and when you have finished.
Can phantom power run my speakers?
No. Phantom power is for condenser microphones and other low-power XLR devices. Connect your mixer to powered speakers or an amplifier for sound output.
Do USB microphones need phantom power?
No. A USB microphone takes its power from the USB connection, so it does not need phantom power or a separate audio interface.
Do Hridz mixers have a warranty?
Yes. The Hridz CT-80S mixer is backed by a 12-month Hridz warranty against manufacturing defects.
Free shipping Australia-wide on orders over $50. Fast AU shipping.













Share:
XLR Cables & Audio Adapters Guide: Which One Do You Need?